Department of Engineering and Communication
The Machine Hall: Equipment
This list is not exhaustive but is updated continuously.
OMAX 5555 (water jet cutting machine)
Travels: X / Y / Z 1395x1395x200 mm
Table size: 2032x1650 mm
Working pressure: 3800 bar
With angular cutting head
The OMAX 5555 is a system for the abrasive waterjet cutting of various materials. Equipped with a swivel head, which makes it possible to install bevels with an angle of up to 60 °.
DMU 50 ecoline
(5-axis CNC milling machine)
Travel: X / Y / Z 500/450/400 mm
Rapid traverse: 24 m / min
Speed range: 20 to 8000 rpm
Tool holder: SK40
Swivel rotary table with digital drives
Swivel range B-axis: -5 ° / + 110 °
Swivel range C-axis: 360 °
Tool magazine with 16 places
The DMU 50 ecoline is a CNC universal milling machine with swivel rotary table that allows milling of 5 sides of a workpiece in one clamping.
NEF 400 (CNC lathe)
Turning length: 650 mm
Turning diameter: 350 mm
Bar passage: 65 mm
Speed range: 0-4500 rpm
Rapid traverse: 30 m / min
12-speed disc turret with VDI30 holders, 6 driven tools, hydraulic spindle brake
The 2-axis universal lathe with C-axis allows computer-controlled turning of components with the possibility of milling on the face and lateral surface by means of driven tools.
FNF 40 C (3-axis NC milling machine)
Universal milling machine with line control
Travel: X / Y / Z 620/420/380 mm
Rapid traverse: 8 m / min
Speed range: 63 to 3150 rpm
Tool holder: SK40
Table size: 400 x 800 mm
Universal milling machine with NC-track control for three-axis milling.
Maho MH 600
(conventional milling machine)
Travel: X / Y / Z 400/165/340 mm
Automatic feed: 10-500 mm / min
Rapid traverse: 1.25 m / min
Speed range: 40 to 2000 rpm
Tool holder: SK40
Table size: 600 x 390 mm
Primate LZ 19-10
(conventional lathe)
Tip width: 1000 mm
Top height: 178 mm
Turning diameter over bed: 360 mm
Turning diameter over cross slide: 215 mm
Spindle bore: 55 mm
Speed range: 35 to 2000 rpm
Wabeco CC-D6000E
(small CNC lathe)
Tip width: 600 mm
Top height: 135 mm
Turning diameter over guide: 270 mm
Turning diameter over cross slide: 170 mm
Spindle bore: 30 mm
Speed range: 30 to 2300 rpm
8-fold tool changer
GMR 2600-4 (guillotine shears)
Cutting length: 2600 mm
Cutting capacity steel: 4 mm
Sheets up to 4mm thick are cut with the guillotine.
Primat HBS 175 (band saw metal)
Machining size
Round material max: 178 mm
Flat material max: 178 x 305 mm
SMG45 (sand blasting cabin)
Working space: 1100 x 660 x 700 mm (WxDxH)
Workbenches
One of the most important workplaces is likely the workbench equipped with standard hand tools, of which there are six in the machine hall.
Wabeco F1210E Highspeed (small CNC milling machine)
Travel: X / Y / Z 500/150/280 mm
Drilling stroke: 40 mm
Speed range: 100 to 7500 rpm
Rapid traverse: up to 600 mm / min
Tool holder: SK30
Table size: 700x180 mm
Swivel bending machine HS 2 AS
Working length: 1020 mm
Max.Blechdicke: 2.5 mm
Bending angle: 135 °
Sheets are bent with this machine.
Werkstattpresse
Max. Pressure: 20t
The workshop press is used for example for pressing in bearings.
Drilling machine HBM GH45
Max. Drilling diameter: 45 mm
Max. Cutter diameter: 28 mm
Max. Face mill diameter: 80 mm
Spindle mount: MK4
Spindle speed: 95-1600 rpm in 6 steps
Clamping table: 730 x 210mm
Edge sanding machine Scheppach Slik 5.0b
Grinding belt width: 150 mm
Sanding pad length: 800 mm
Foldable sanding pad 0 ° and 90 ° with workpiece stop
Swiveling longitudinal and transverse tables.
The edge grinder deburrs parts and applies phases.